Thursday 5 May 2016

Cleaning your Tracks with a Cork

I cut a cork in half for use as a track cleaner.
I was reading Eric Hansmann blog "Notes on Designing, Building and Operating Model Railroads" last week which included a great idea for cleaning track. I tried it out and it to seems to works well for me...here are Eric's comments on the subject from his Spring Cleaning post...George Dutka

"Before moving the freight cars back onto the newly cleaned sections, a piece of cork was rubbed over the rail heads to remove dirt. I use wine bottle corks that are cut lengthwise into a half cylinder. No fluid was applied, although I have soaked the cork face with 90% Isopropyl alcohol to clean the track a couple of times. Usually the dry cork face is enough to remove the light film that accumulates between monthly sessions. A few corks are kept handy for track cleaning."

Notes on Designing, Building, and Operating Model Railroads

A cork in use on the White River Division. Thanks to my wife I have a stockpile of corks and a lot of empties to return for deposit. She is happy to do her part in keeping my layout clean and running.

6 comments:

  1. Interesting idea, George. Thanks for sharing it.
    I've treated my rails with a 2B graphite stick. I've written about this on my blog (link below). It works beautifully. And since doing this, I've NEVER had to clean my rails. It's been almost three years (including a major, dust-generating home renovation) and things still run fine.
    http://themodelrailwayshow.com/cn1950s/?p=3286
    Cheers!
    - Trevor (Port Rowan in 1:64)

    ReplyDelete
    Replies
    1. Graphite Stick...sounds interesting...will have to look into that also...George

      Delete
  2. What a timely post! I just added another cork to the collection last night, and I don't open a bottle of wine that often. My jar of corks is almost full - now I have another use for them! (Previous uses include carving stumps and figures.)

    ReplyDelete
    Replies
    1. Hi Galen:
      I know who to ask if I run low with corks...George

      Delete
  3. I do the same with left over pieces of cork roadbed, works great! Will have to put this on my blog too.

    Joe smith

    ReplyDelete
    Replies
    1. That sounds like a good alternative...George Dutka

      Delete